Energy and<br/>infrastructure

Energy and
infrastructure

Energy and<br/>infrastructure

Energy and
infrastructure

Energy and<br/>infrastructure

Energy and
infrastructure

Energy and
infrastructure

Image

In more than three decades of experience working on a series of very demanding energy and infrastructure projects, ING-GRAD managed to complete the entire process of energy production in a diverse list of projects.

These are projects of construction, reconstruction, rehabilitation and extension of wind and thermal power plants, bio-powered power plants and infrastructural facilities. At the very end of the energy circle there is a series of gas stations of the largest Croatian oil company INA - industrija nafte d.d.

Work on these projects is complex precisely because of the challenging terrain, which in many cases is difficult to access, and the work includes everything from the construction of access roads and roads to massive concrete.

Energy (28)

Infrastructure (9)

Petrol stations (6)

Infrastructure

In energy and infrastructure projects, we highlight the following works:

Geomechanics and earthworks

Geomechanics and earthworks refer to the construction of reinforced concrete piles that are drilled into the ground and reinforced with special reinforcing baskets or steel profiles that are installed in the wells and filled with concrete. In this way, on soil that is not favourable for foundation, a skeleton structure is made in the ground, which enables the load-bearing capacity of the entire building in the making.

Did you know?

During the restoration of the bridge on the Drava River in Osijek, the caisson foundations of the bridge were repaired by installing reinforced concrete panels - talps, underwater concreting with a concrete mass made according to a special recipe and injecting the foundation soil with micro-concrete.

Construction of reinforced concrete, steel and other structures

The construction of the object can be called its skeleton. The classic and most common is the reinforced concrete construction, while the steel construction is used in the construction of large halls or production facilities because it enables faster and easier construction.

Did you know?

The heat accumulator HEP TE-TO Zagreb is a steel tank with a diameter of 24 m and a shell height of 47.5 to 50.12 m, for which a reinforced concrete base plate with a diameter of 27 m and a thickness of 2 m is built, supported on 69 reinforced concrete piles with a length of 20 m.

Construction of sewage systems

In the construction of sewerage systems, we are talking about so-called linear structures, which differ from the construction of classic construction structures. These are facilities that are continuously developed on the given routes in the most populated areas and include, in addition to the construction of the route itself, the construction of accompanying facilities, gravity and pressure collectors, and the rehabilitation of roads damaged during the works.

Did you know?

The project to expand the sewage network of the city of Poreč included the construction of 64 km of sewage system, gravity and pressure collectors, and road rehabilitation.

Construction of transport infrastructure

When building infrastructural and energy facilities, it is necessary to ensure access to the construction site and the facility itself, so in that case, temporary macadam access roads are built, which are created primarily for the delivery and removal of materials, the flow of equipment and people, and are ultimately arranged as a permanent traffic infrastructure of newly built facilities.

Did you know?

The construction of the Korlat, Lukovac and Zelengrad wind farms was preceded by the routing and construction of several kilometres of access roads on the difficult and demanding terrain of the Dalmatian hinterland.

more than50

energy and infrastructure projects

more than330

MW of renewable energy

Dr. Franjo Tuđman Bridge, Dubrovnik

Investor
Hrvatske ceste d.o.o.

Category
Infrastructure

State-of-the-art technology and equipment were used to consolidate the rock mass under the abutments and protect and arrange the slope under the bridge abutments. On difficult-to-access, dangerous and demanding terrain, it was necessary to build a heavy load-bearing scaffolding and working platforms for the production of anchors and anchor blocks.

 

most-dubrovnik_1 most-dubrovnik_10 most-dubrovnik_11 most-dubrovnik_12 most-dubrovnik_13 most-dubrovnik_14 most-dubrovnik_15 most-dubrovnik_16 most-dubrovnik_17 most-dubrovnik_18 most-dubrovnik_19 most-dubrovnik_2 most-dubrovnik_20 most-dubrovnik_3 most-dubrovnik_4 most-dubrovnik_5 most-dubrovnik_6 most-dubrovnik_7 most-dubrovnik_8 most-dubrovnik_9

ROCK MASS CONSOLIDATION WORKS UNDER THE BUTTONS PROTECTION AND LANDING OF THE SLOPE BELOW THE BUTTONS CONSTRUCTION OF HEAVY BEARING SCAFFOLDING AND WORKING PLATFORM

  2. Home
  3. What we do
  4. Energy and infrastructure
  5. Infrastructure
  6. Dr. Franjo Tuđman Bridge, Dubrovnik
Image

Company

ING-GRAD d.d.

Kalinovica 3/IV
10 000 Zagreb, Croatia

Contacts

+385 1 / 30 33 000

+385 1 / 30 33 010

ing-grad@ing-grad.hr

ING-GRAD d.d. © 2025, All rights reserved! Privacy policy
Save
Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Read more
Nužno potrebni kolačići
Ti su kolačići neophodni za funkcioniranje web-mjesta i ne mogu se isključiti u našim sustavima. Obično se postavljaju samo kao odgovor na akcije koje ste izvršili, a kojima se upućuje zahtjev za usluge, primjerice postavljanje preferenci za privatnost, odjavljivanje ili ispunjavanje obrasca. Te kolačiće možete blokirati u pregledniku ili postaviti da vas preglednik o njima upozorava, no u tom slučaju određeni dijelovi web-mjesta možda neće raditi.
www.ing-grad.hr
Accept
Decline
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline